SAVE VTR 200 L High energy-efficiency rotary heat exchanger with EC fan in white finish for areas to 180m2

SAVE VTC 200 is designed for ventilated areas up to 180 m². Left and right handed models are available.

The unit can be installed on the wall and preferably in a storeroom or laundry room.

The casing is built of sheet metal and well insulated against condensation. The inner part of the case is made of expanded polypropylene (EPP) and provides extremely good insulation in terms of noise and heat loss. All components can be easily removed for maintenance and service. The unit is equipped with a high efficiency counter flow heat exchanger. Energy efficient fans with EC motors as well as low-pressureFilters reduce the energy consumptions and ensures low SFP factor (Specific Fan Power) and sound level. The built-in humidity sensor in extract air can be used for demand control.

The unit can be operated in a variety of ways:

• SAVE LIGHT Control panel for basic functions such as airflow control, general alarm andFilter change indication.
• SAVE TOUCH Control panel with touch screen and full access to all functions and settings. The home screen displays information such as airflow, temperature, air quality and active functions. You can select between MANUAL and AUTO mode or select preferred settings from the pre-configured user modes and much more.
• SAVE CONNECT Home solutions by Systemair mobile application and Internet Access Module for wireless control of the SAVE unit. The mobile application mirrors functionality of SAVE TOUCH control panel and allows you to access all control functions on your smartphone.

Each control method is optional and have to be ordered separately as an accessory. The unit is prepared for control panel installation in the front door. The cable for external control panel installation is not included and has to be ordered separately.

The unit has an automatic defrosting function with 3 different modes to choose from, depending on the indoor environment as well as the outdoor conditions.

Without a preheater, the unit works down to 0m²C in tight houses / passive houses where unbalanced airflow is not allowed. When airflow unbalance is allowed, without a preheater the unit works down to -3 m²C. Below -3 m²C a preheater is always needed. The pre-heater and a CB Preheater Connection kit can be ordered as accessories.

External connection board that has prewired inputs and outputs allows easy installation and setup of external sensors as well as external heaters / coolers and other accessories.