SAVE VSR 500 heat recovery unit for ventilated areas to 400m2

SAVE VSR 500 is adapted for ventilation of areas up to 400 m² The unit can be installed in the upright position on the floor or horizontally on the ceiling. A ceiling mounting kit is available as an accessory.

SAVE VSR 500 has double skinned fully insulated panels. The unit is equipped with a high efficiency variable speed rotating heat exchanger and a moisture transfer function that regulates the rotation speed of the rotor. Energy efficient fans with EC motors as well as low-pressureFilters reduce the energy consumptions and ensures low SFP factor (Specific Fan Power) and sound level. The built-in humidity sensor in extract air can be used for demand control.

The unit can be operated in a variety of ways:

• SAVE LIGHT m²Control panel for basic functions such as airflow control, general alarm andFilter change indication.
• SAVE TOUCH m²Control panel with touch screen and full access to all functions and settings. The home screen displays information such as airflow, temperature, air quality and active functions. You can select between MANUAL and AUTO mode or select preferred settings from the pre-configured user modes and much more.
• SAVE CONNECT Home solutions by Systemair mobile application and Internet Access Module for wireless control of the SAVE unit. The mobile application mirrors functionality of SAVE TOUCH control panel and allows you to access all control functions on your smartphone.

Each control method is optional and have to be ordered separately as an accessory. 6 meter cable for the control panel connection to the unit is included with the unit.

The unit comes with a built-in electric reheater.

External connection board that has prewired inputs and outputs allows easy installation and setup of external sensors as well as external heaters / coolers and other accessories.

External connection board that has prewired inputs and outputs allows easy installation and setup of external sensors as well as external heaters / coolers and other accessories.

The unit comes with low-pressure bagFilters:

• Supply airFilter F7/ePM2.5 70%
• Extract airFilter G3/Coarse 50%

Low pressure bagFilter G3/Coarse 60% is available as an accessory for supply airFiltering.

Passive House Institute (PHI) approvedFilter set (F7/ePM1 60% - F7/ePM1 60%) which is required for Passive House function is available as an accessory.