Topvex FC06-R-CAV heat

• Topvex is delivered with the Access control system
• Flat design
• Low energy use
• Energy efficient plug fans with EC motors
• High efficient counter flow heat exchanger > 80% dry efficiency (EN 308) at nominal airflow
• Large inspection doors for easy maintenance
• All main components are easy removable
• Separate electrical cabinet facilitates commissioning and service
• Sliding doors as an accessory
• Manufactured in Aluzinc plated sheet metal (AZ185)
• Corrosive class C4 (Industrial and coastal areas with moderate salinity)
• AZ185 sheet metal has more than 50 years of technical lifetime
• Factory tested

Topvex FC is a series of efficient ventilation units designed for suspended ceiling installations. The units are especially designed to meet stringent energy requirements with low energy use and high-efficiency heat recovering.

Topvex FC is a very flat unit designed for false ceiling installation. The overall heights are only: Topvex FC02=350mm, FC04=400mm and FC06=500mm.

The separate electrical box with all cable connections collected at one place facilitates commissioning and service. To simplify the access the electrical box can be tilted 90 °.

Constant air volume control is standard and Variable air volume control is available as an accessory.

Topvex is delivered with the new Access control system. The system includes NaviPad control panel, featuring an easy-to-use intuitive HTML5 user interface.

The protection class of the NaviPad control panel is IP54 and 0-50°C; permitted temperature. The enclosure is not UV resistant and the NaviPad is not for outdoor mounting. Communication between the panel and the controller in the cabinet is possible with up to 100 meters of cable.

The NaviPad is connected via 3 meters flat cable. It is mounted on the Topvex unit or on the wall, easy to detach for handheld use.

Relevant operating data and settings are available in real time and can be changed with a few clicks.

Access control has built-in energy saving features like free cooling, cooling recovery, season related temperatures and airflow control.

Possibility to edit names for the unit, the alarms and control components gives the user options to adapt to different installations needs.

With the system overview dashboard it is possible to monitor several air handling units within a local network.

Standard communication possibilities are: Modbus RTU via RS-485 & TCP/IP & BACnet via IP.

Ordering codes

• Model - FC02, FC04 and FC06.
• Heating coil - EL (Electric), HWL (Hot water coil-low power), HWH (Hot water coil-high power), None (No heater).
• Right or Left model - R (Right), L (Left). The side where the supply air is located when viewed from the side of the electrical box and access side.
• Airflow control - CAV(Constant air volume), Airflow control (accessory), VAV (Variable air volume = constant duct pressure control).