MUB 025 355°C Multibox. 3,200m³/h, 230v Centrifugal box fan, insulated, flexible outlet

The power electronics are integrated in the motor housing. From size 355 all models have one potential-free terminal for error message.

All motors are suitable to be used for 50/60Hz. The input voltage for single phase units can vary between 200 and 277V, for three phase units between 380 and 480V. Speed control by a 0-10V signal.

The fans are delivered with a pre-wired potentiometer ( 0-10 V) that allowes you to easily find the desired working point.

All models are equipped with impellers with backward curved blades, manufactured from polypropylen PP .The casing consists of an aluminium frame with fibreglass reinforced plastic corners of PA6; highly shock-resistant.

The double skin panels are manufactured from galvanized steel with 30 mm mineralwool insulation. To avoid condensation the profile is provided with a separate chamber to fix the screws.

The panels are removable, any outlet side can be chosen, allowing flexible ventilation solutions.

The Multibox can also be used as extract- or supply air unit in air handling units. Installation in any mounting position is possible.

MUB with additional modules Filters, heaters etc.) are available as air handling units "K025, K042 or K062" on request!

The MUB-EC series in sizes 315 to 710 is licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

00 % speed controllable
Integrated electronic motor protection
low noise level
Flexible airflow direction due to removable panels
Installation in any mounting position
Safe and maintenance free operation
Energy-saving
Potentiometer included for ease of commissioning
RS-485 interfaces for networking via MODBUS RTU from size 355
AMCA-certified performance curves