MM - Base Cabinet Heater - Hot Air Heating From 43 to 500Kw

MM - Industrial Hot Air Heating from 43 to 500Kw

See Models: MM-050-G. MM-070-G. MM-105-G. MM-160-G. Mm-200-G. MM-250-G. MM-300-G. MM-350-G. MM-400-G. MM-500-G.

MM hot air generators are indirect heating type equipment (hot air does not mix with the flue gases) and they work totally autonomously.

They do not need additional heat dissipation elements, reducing the costs of acquisition, installation and maintenance.

Its operation is based on heating a certain air flow, through the combustion of diesel, natural gas or propane gas. This flow is sucked in and driven by the fans that the equipment incorporates and comply with the ERP 2020 regulations.

The main advantages over other heating systems are:

• Reduction of acquisition and installation costs
• Very fast heating system
• Air diffusion can be direct or a duct network can be applied
• 90% combustion efficiency

Instalation

1) Hot air generator with air supply grilles

2) Hot air generator with rotating nozzles

3) Hot air generator with duct and rotary diffusers.

Characteristics

• High performance combustion oven made of AISI-304 or 430 stainless steel in the areas most exposed to heat
• Exterior panel made of galvanized steel lacquered in polyester powder and oven-dried
• Thermal insulation of the areas most exposed to heat
• Low noise centrifugal fans
• IE3 high efficiency electric motors
• Control and safety electrical panel according to European regulations
• Control Thermostats (Fan/Burner/Thermal Safety) room thermostat
• Security system to control the correct depression of the combustion chamber.
• Hot air outlet at the top, where 4-sided air outlet grilles can be installed, rotary outlets for air delivery or directly assembled to a duct network.

The MM range of Base Cabinet heaters come with a burner mounting plate cup and are compatible with Riello, Selas and Ecoflan burners.