125mm deep Natural convection trench heating - Standard

The Hitte team has been designing and manufacturing space heating products for over 20 years In the Czech Republic. High quality materials, skilled engineers and modern production methods are combined to deliver the Httte portfolio which carrles a 10 year manufacturer's warranty.

The contemporary and stylish Trench and Perimeter Heating ranges offer highly effective and discrete heating and cooling solutions whether installed as primary or secondary heating systems or as a coldalr barrier under large glazed areas.

The Hitte Trench range includes Natural Convection, Fan Assisted and Electric options as well as combined Heating—Cooling units. Models are also available for use in wet and humid environments.

For areas where creating a floor trench is not feasible, the Natural Convection floor standing Perimeter Heater presents an elegant alternatrve.

In addition to the standard straight trench units, mitred cornering, and blank units can be added to provide a continuous aesthetic. Curved/arc shaped trench heaters can also be manufactured to order, The Hitte team will undertake bespoke designs for the mostcomplex and challenging of protects.

1. The standard trough, for use In dry environments, is available in either black powder coated FeZn steel or AISI 304 stainless steel. For wet and humid environments and for heating-coolIng trench units the trough is in AISI stainless steel.
2. The flexible sprung design grille is available in various aluminium shades or wood.
3. There are 2 protecive metal cover plates, the larger covers the pipe connectons and the under smaller covers the electrical terminals.
4. The decorative edging can match the selected grille colour. It must hbe flush with the floor or within 1mm.
5. The spacer is used to maintain the geometry of the trough prior to installation. It should be removed post-installation.
6. The 24DC fan for fan-assisted heating models (Fan assisted Trench heating models have a significantly increased heating output level compared to natural convectIon models).
7. The heat exchanger element has aluminium fins on copper tubes with1/2" connections.
8. There is a drainage pipe for water/condensate outflow, for models NIVX,FWX, and FCX.
9. The height-adjustable fixing screw attaches the trench unit to the french floor after the unit has been levelled.
10. Adjustable leveling legs - one at each corner and additional legs along the length of the trough on longer units.
11. Knock-outs for heating pipe access.
12. Alr bleed valve.