Flamrad 625 U Tube 23kW Gas Fired radiant tube heater. PART L 2010 compliant

Details

Six input ratings: 15kW to 47kW
Available in Linear and 'U' models
'Herringbone' link flue systems available with 'U' and Linear models
Heat treated Aluminised Calorised emitter tube surface - for a flake free cleaner working environment
Available in Natural gas and Propane
Aluminium reflectors - designed to maximise downward radiant heating effect
Lightweight construction - 4" tubes supplied in 3m sections - easy to assemble and fit
CE approved
Energy efficient - cost saving fuel bills
UK manufactured under ISO9001:2008 quality assured systems

Title	Value
Capacity	23kw
Dimensions H x W x L (mm)	175 x 460 x 5385
mounting height (m) (horizontal / angled)	3.0 - 8.0m / 2.7 - 5.0m
Minimum Clearances to combustable material (mm) Side / above / below / end / front / rear	510 / 450 / 1220 / 510 / 610 / 305
Weight (KG)	47

Out of stock

Additional Details

Additional Details
Delivery	Dependant on stock availability. Check with us before ordering
Brand	Flamrad
Warranty	1 year manufacturers warranty

600_Series_leaflet.pdf (3.9MB)

Heat Load	Watts	BTU
Average The Room Is A Normal Residential Room, Office, Reception Area Or Similar, Where There Is Not Overly Crowded With People, Computer And Office Equipment.
Above Average There Are Factors That Contribute To Additional Heat Being Generated In The Room E.G. Strong Lighting, Overcrowding With People And Office Equipment, Conservatory Type Room, Or Flat Roofed Room.
High There Are Factors That Contribute To A High Heat Load In The Room. E.G. Commercial Cooking, Much Computer And Server Equipment, Switchgear, Temporary Building With Thin Walls And Flat Room, Plain Glass Conservatory.

Variable	Units	Notes/Guidance
System Airflow	M3/Hr	If you have it in cfm then multiply your cfm value by 1.7 to get m3/hr
Average Combined Pressure Drop Of Filters Of Higher Than F6 Efficiency	Pascals	F8 bag filters pressure drop - typical clean clean to dirty, 160 - 250 Pascals F9 compact filters pressure drop - typical clean to dirty, 160 - 350 Pascals H10 HEPA filter pressure drop - typical clean to dirty, 250 - 600 Pascals 9.8 Pascals = 1 mm wg, & 249 Pascals = 1 inch wg
Carbon Filters Pressure Drop	Pascals	For compact type carbons pressure drop between 100 - 150 Pa Bonded carbon panels typically 150 - 170 Pa Loose granular carbon panels typically 130 Pa
Annual Operational Hours	Hrs/Annum	8760 hours in a year If operating for 5 days a week, excluding public holidays, for 12 hrs/day = 3000 hrs
Cost Of Power	Pence Per Kwh	Huge variance in what different companies pay. heck your last bill to be sure, otherwise put in 10p
Fan Efficiency	(As Decimal Value, Eg 100%=1)	Would typically be around 60%, so if you don’t have specific information use 0.6
Fan Motor Efficiency	(As Decimal Value, Eg 100%=1)	Larger motors should be around 90%, so if you don’t have specific information use 0.9

The Total Average Pressure Drop Over Your Higher Efficiency Filters And/Or Carbon Filters Is;		Pascals
This Pressure Drop Is Costing In Energy Alone	£	Per year
It Is Probable That A Sanuvox In-Duct System Could Break Down The Biological, Chemical And Odourous Contaminants On This Air Flow For Between 16 And 25% Of This Running Cost	£	Lower energy cost estimate of an equivalent Sanuvox system (16%)
	£	Higher energy cost estimate of an equivalent Sanuvox system (25%)

Type Of Building	Kw Range		BTU Range
Sports Centres
Retail Premises
Office Premises
Small Industrial Unit
Medium Industrial Units
Larger Industrial Buildings
School/Community Halls
Churches

Room/building volume	m3
Temperature differential (deltaT °C)	°C

Get in Touch