AW DX22 11.1 kw fan heater/ 9.2kw fan cooler
The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc.
Can be combined with outdoor units made by various manufacturers and their control equipment accessories.
• Designed for heating and cooling.
• Condensation insulation between coil and casing.
• 4 mm fin spacing minimises maintenance, even in dusty surroundings.
• Hydrophilic coated fins for optimum condensation run-off.
• Stainless steel condensation trough, with condensation insulation underneath.
• Adjustable deflectors to control height of air flow.
• Snap lock cover to connect transmitter on coil.
• Snap lock cleaning cover.
• Protection class IP44 - splash-resistant
Design
The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant).
Controls
AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed.
| Type | AW DX22 | |
| Power supply | 230V | |
| Cosumption | A | 0.60 |
| Air volume | m3/h | 2000 |
| Sound pressure level | dB(A) | 52 |
| Max. operating pressure | bar | 4.15 |
| Inner volume coil | I | 2.3 |
| Pipe connection cooling pipe, liquid/gas | 3/8" - 5/8" | |
| Condensation drain | G1/2" | |
| Max. ambient temperature | °C | 40 |
| Coolant | R410A | |
| Protection class | IP44 | |
| Weight | kg | 48 |
The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc.
Can be combined with outdoor units made by various manufacturers and their control equipment accessories.
• Designed for heating and cooling.
• Condensation insulation between coil and casing.
• 4 mm fin spacing minimises maintenance, even in dusty surroundings.
• Hydrophilic coated fins for optimum condensation run-off.
• Stainless steel condensation trough, with condensation insulation underneath.
• Adjustable deflectors to control height of air flow.
• Snap lock cover to connect transmitter on coil.
• Snap lock cleaning cover.
• Protection class IP44 - splash-resistant
Design
The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant).
Controls
AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed.
| Type | AW DX22 | |
| Power supply | 230V | |
| Cosumption | A | 0.60 |
| Air volume | m3/h | 2000 |
| Sound pressure level | dB(A) | 52 |
| Max. operating pressure | bar | 4.15 |
| Inner volume coil | I | 2.3 |
| Pipe connection cooling pipe, liquid/gas | 3/8" - 5/8" | |
| Condensation drain | G1/2" | |
| Max. ambient temperature | °C | 40 |
| Coolant | R410A | |
| Protection class | IP44 | |
| Weight | kg | 48 |
The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc.
Can be combined with outdoor units made by various manufacturers and their control equipment accessories.
• Designed for heating and cooling.
• Condensation insulation between coil and casing.
• 4 mm fin spacing minimises maintenance, even in dusty surroundings.
• Hydrophilic coated fins for optimum condensation run-off.
• Stainless steel condensation trough, with condensation insulation underneath.
• Adjustable deflectors to control height of air flow.
• Snap lock cover to connect transmitter on coil.
• Snap lock cleaning cover.
• Protection class IP44 - splash-resistant
Design
The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant).
Controls
AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed.
| Type | AW DX22 | |
| Power supply | 230V | |
| Cosumption | A | 0.60 |
| Air volume | m3/h | 2000 |
| Sound pressure level | dB(A) | 52 |
| Max. operating pressure | bar | 4.15 |
| Inner volume coil | I | 2.3 |
| Pipe connection cooling pipe, liquid/gas | 3/8" - 5/8" | |
| Condensation drain | G1/2" | |
| Max. ambient temperature | °C | 40 |
| Coolant | R410A | |
| Protection class | IP44 | |
| Weight | kg | 48 |
The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc.
Can be combined with outdoor units made by various manufacturers and their control equipment accessories.
• Designed for heating and cooling.
• Condensation insulation between coil and casing.
• 4 mm fin spacing minimises maintenance, even in dusty surroundings.
• Hydrophilic coated fins for optimum condensation run-off.
• Stainless steel condensation trough, with condensation insulation underneath.
• Adjustable deflectors to control height of air flow.
• Snap lock cover to connect transmitter on coil.
• Snap lock cleaning cover.
• Protection class IP44 - splash-resistant
Design
The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant).
Controls
AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed.
| Type | AW DX22 | |
| Power supply | 230V | |
| Cosumption | A | 0.60 |
| Air volume | m3/h | 2000 |
| Sound pressure level | dB(A) | 52 |
| Max. operating pressure | bar | 4.15 |
| Inner volume coil | I | 2.3 |
| Pipe connection cooling pipe, liquid/gas | 3/8" - 5/8" | |
| Condensation drain | G1/2" | |
| Max. ambient temperature | °C | 40 |
| Coolant | R410A | |
| Protection class | IP44 | |
| Weight | kg | 48 |
The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc.
Can be combined with outdoor units made by various manufacturers and their control equipment accessories.
• Designed for heating and cooling.
• Condensation insulation between coil and casing.
• 4 mm fin spacing minimises maintenance, even in dusty surroundings.
• Hydrophilic coated fins for optimum condensation run-off.
• Stainless steel condensation trough, with condensation insulation underneath.
• Adjustable deflectors to control height of air flow.
• Snap lock cover to connect transmitter on coil.
• Snap lock cleaning cover.
• Protection class IP44 - splash-resistant
Design
The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant).
Controls
AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed.
| Type | AW DX22 | |
| Power supply | 230V | |
| Cosumption | A | 0.60 |
| Air volume | m3/h | 2000 |
| Sound pressure level | dB(A) | 52 |
| Max. operating pressure | bar | 4.15 |
| Inner volume coil | I | 2.3 |
| Pipe connection cooling pipe, liquid/gas | 3/8" - 5/8" | |
| Condensation drain | G1/2" | |
| Max. ambient temperature | °C | 40 |
| Coolant | R410A | |
| Protection class | IP44 | |
| Weight | kg | 48 |
The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc.
Can be combined with outdoor units made by various manufacturers and their control equipment accessories.
• Designed for heating and cooling.
• Condensation insulation between coil and casing.
• 4 mm fin spacing minimises maintenance, even in dusty surroundings.
• Hydrophilic coated fins for optimum condensation run-off.
• Stainless steel condensation trough, with condensation insulation underneath.
• Adjustable deflectors to control height of air flow.
• Snap lock cover to connect transmitter on coil.
• Snap lock cleaning cover.
• Protection class IP44 - splash-resistant
Design
The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant).
Controls
AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed.
| Type | AW DX22 | |
| Power supply | 230V | |
| Cosumption | A | 0.60 |
| Air volume | m3/h | 2000 |
| Sound pressure level | dB(A) | 52 |
| Max. operating pressure | bar | 4.15 |
| Inner volume coil | I | 2.3 |
| Pipe connection cooling pipe, liquid/gas | 3/8" - 5/8" | |
| Condensation drain | G1/2" | |
| Max. ambient temperature | °C | 40 |
| Coolant | R410A | |
| Protection class | IP44 | |
| Weight | kg | 48 |
The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc.
Can be combined with outdoor units made by various manufacturers and their control equipment accessories.
• Designed for heating and cooling.
• Condensation insulation between coil and casing.
• 4 mm fin spacing minimises maintenance, even in dusty surroundings.
• Hydrophilic coated fins for optimum condensation run-off.
• Stainless steel condensation trough, with condensation insulation underneath.
• Adjustable deflectors to control height of air flow.
• Snap lock cover to connect transmitter on coil.
• Snap lock cleaning cover.
• Protection class IP44 - splash-resistant
Design
The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant).
Controls
AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed.
| Type | AW DX22 | |
| Power supply | 230V | |
| Cosumption | A | 0.60 |
| Air volume | m3/h | 2000 |
| Sound pressure level | dB(A) | 52 |
| Max. operating pressure | bar | 4.15 |
| Inner volume coil | I | 2.3 |
| Pipe connection cooling pipe, liquid/gas | 3/8" - 5/8" | |
| Condensation drain | G1/2" | |
| Max. ambient temperature | °C | 40 |
| Coolant | R410A | |
| Protection class | IP44 | |
| Weight | kg | 48 |
The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc.
Can be combined with outdoor units made by various manufacturers and their control equipment accessories.
• Designed for heating and cooling.
• Condensation insulation between coil and casing.
• 4 mm fin spacing minimises maintenance, even in dusty surroundings.
• Hydrophilic coated fins for optimum condensation run-off.
• Stainless steel condensation trough, with condensation insulation underneath.
• Adjustable deflectors to control height of air flow.
• Snap lock cover to connect transmitter on coil.
• Snap lock cleaning cover.
• Protection class IP44 - splash-resistant
Design
The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant).
Controls
AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed.
| Type | AW DX22 | |
| Power supply | 230V | |
| Cosumption | A | 0.60 |
| Air volume | m3/h | 2000 |
| Sound pressure level | dB(A) | 52 |
| Max. operating pressure | bar | 4.15 |
| Inner volume coil | I | 2.3 |
| Pipe connection cooling pipe, liquid/gas | 3/8" - 5/8" | |
| Condensation drain | G1/2" | |
| Max. ambient temperature | °C | 40 |
| Coolant | R410A | |
| Protection class | IP44 | |
| Weight | kg | 48 |
| Delivery | Dependant on stock availability. Check with us before ordering |
|---|---|
| Brand | Veab |
| Warranty | 1 year warrenty in compliance with ORGALIME S2000 |