industrial space heaters and radiant heaters

The following control switching gear and thermostats are offered as options on many of the radiant heaters that we list.

ERP, electric heating control		ERP is a modern. variable control that precisely adapts energy use to the current demand. Intended for single-phase or 2-phase electrical heaters. The control is connected in series between the mains and an electrical heater.The current is electronically switched by a triac without any moving parts. Therefore. the ERP is silent and maintenance free . ERP makes the temperature of the heaters even. for maximum comfort.The current is switched at zero phase angle. to eliminate network disturbance. Therefore. the ERP is silent and maintenance free . ERP makes the temperature of the heaters even. for maximum comfort.The current is switched at zero phase angle. to eliminate network disturbance. ERP has a built-in temperature sensor. but external sensors (extra) can be connected and be mounted in a room or incoming air channel. For larger power outputs a slave unit (ERPS) can be connected. Each ERPS can handle the same power as ERP. Functions ERP:Comfort temperature. economy saving via external time switch. Ambient temperature: 0–30 °C. Economy saving: 0–10 °C. Voltage: 230V~/400V2~ Load: 3500/6400 W Dim: 153x94x43 mm Colour: white. IP20. CE compliant.
CIRT, stepless output control		Stepless output control with timer, primarily intended for infrared heaters and other radiant heaters. Especially suited for spot and zone heating. The heat contribution is regulated for best comfort (25-100 %). The built-in timer can be set for 0,5 to 4 or 4 to 24 hours. IP44. Voltage: 230 V~/400 V2~ Load: 3500/6000 W Dim: 155x87x43 mm CE compliant
S123, manual switch for 1-2-3 steps		Controls the output in three steps 0-1/3-2/3-3/3.Used with EZ300, IR or IRCF, it is possible to manually connect the heater’s elements 1 + 1 + 1. IP42. Dim: 72x64x46 mm CE compliant
KRT1900 Capillary tube thermostat		Capillary tube thermostats with alternating contacts. Industrial thermostats with alternating contacts to primarily control heat, cold, fans etc. Housing of thermal plastic. Colour: grey white, RAL 9003. Approved by SEMKO and CE compliant.
T10 TK10 TD10 Processer controled thermostat		Processor controlled thermostats for room/floor heating. Available with concealed/visible knob or digital display. Model with visible knob also available with 2-pole switch and in 400 V. External sensor (RTS01) available as an accessory. CE compliant.